14.5.06

DosBox Guide


DOSBox supports IPX since version 0.65 and it improved significantly the efficiency of MOO2 MP Online Games. Keep in mind that by using DOSBox also Linux, 2k, Vista and even Mac users are now able to join our Multiplayer Games. Therefore, DOSBox is now considered as the de facto solution for multiplayer. In the meanwhile, the IRC channel irc.quakenet.org#moo2 (This link works for FF+chatzilla/Opera users. IE users should use the client at the top of the sidebar) is the new meeting point for MOO2 Online Games. It was introduced in August 2006 after most MOO2 players started to use the new DOSBox version.

Before the guide starts, I'd like to add a small FAQ section.

A) Why should I use the DOS version?

First of all, regarding multiplayer the DOS version orion2.exe is far superior to the WIN version orion95.exe. When you have ever tried to setup a MOO2 network game you may have observed this already: The orion95.exe lags extremely. Up to several minutes between the turns. You may ask for the reason, let me therefore quote the developer Rob Corell:

"It [MOO2] was definitely developed under DOS. I did the DOS network support, and don't even remember any Win95 testing for MOO2."

To sum it up: Network games under orion95.exe are considered unplayable but the orion2.exe provides appealing results.

B) I have installed the Windows version orion95.exe. Why should I read this guide?

First, most MOO2 CDs contain both versions, i.e. orion95.exe and orion2.exe. Second, even if you own just a "Windows only" release (e.g. the Atari Download version), you should take into account that there are just minor differences between Windows and DOS version. It is patchable with the last official 1.31. Proceed with step 1B in this case.

C) DOSBox is just too slow. Do I have to use DOSBox?

There are alternatives to DOSBox, but I don't recommend them any longer (there are far too many problems involved on modern hardware). Actually, the newest DOSBox version (with default settings) works pretty fast on modern computers. So you have probably just an old DOSBox version (just update DOSBox in this case) or an older computer. In the latter case you should read step 7 to speed up DOSBox.

DOSBox Guide for MOO2 Multiplayer:

1. There are two ways to "install" the DOS version orion2.exe. In any case I emphasize to use the default folder. Users with a different folder name should take notice of this important NOTE. This 8 character limit under DOS is the main error of most DOSBox users.

1.A Conventional Way (win95/98/ME/XP can use this way.)
Find the Install.exe on your Moo2 CD and double click it to start the DOS installer. For further details see step 1 and 2 in LordBrazen's guide. Note, that step 2 in LordBrazen's guide isn't optional! (I.e. without this step you will need to mount your CD drive, too.) And I recommend to use the default folder: C:\MPS\ORION2
Any trouble? Try it with 1.B then:

1.B Unconventional Way (Linux, MAC, Win2k users or users without install.exe/orion2.exe have to use this way.)
Just copy the entire CD onto the hard drive! Once again, I recommend to use the default folder: MPS\ORION2
If orion2.exe and/or rkernel.com file(s) are missing:
Unzip this rkernel.zip file in your MOO2 directory and proceed. No worries about orion2.exe: The 1.31 zip patch in step 2 contains the exe file of the dos version.)
Once all the files are copied you will possibly need to edit the 'ORIONCD.INI' file within the C:\MPS\ORION2 folder. Change the top line in the file to C:\MPS\ORION2

2. Apply the moo2v131.zip patch. Important! 1.4 will only work with the ENGLISH 1.31 patch. (German or multilingual 1.31patch won't work. But German or other versions are no problem after applying the above mentioned patch.)

3. Apply the v1.40 patch (Latest version - 1.40b23 (MOO2v140 patch FAQ) You should follow these instructions and an 1.4 desktop shortcut is quite helpful (see step 6).

4. Download DosBox 0.72 and install it.

The steps 5-8 are related to the dosbox.conf file. The default location of this text file is:
C:\Programs\DOSBox-0.72\dosbox.conf

5. Open your dosbox.conf file with an usual text editor and and enable IPX, i.e. edit the following entry
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=true

6. We need now the exact MS-DOS name of your MOO2 working directory. The above-mentioned 1.4 shortcut is now helpful, especially if you have a different folder than default. Therefore, right click the 1.4 desktop shortcut - Properties - Program tab and copy the entry of the Working field to the clipboard:

After following the steps under 1A or 1B, the default entry should be
C:\MPS\ORION2
Paste now (from the clipboard) this entry to the [autoexec] part of the dosbox.conf file. With the default entry the necessary lines are:
[autoexec]
# Lines in this section will be run at startup.

mount c c:\MPS\ORION2
c:
orion2~1

The first two bold lines represent the so called mounting, i.e. DOSbox will launch an exe file from this working directory now. The third line is the command to launch the orion2v140.exe in this folder.

NOTE: For those without this shortcut and/or different working directory: Keep in mind that the 8 character limit under MS-DOS truncates names. For example C:\Microprose\Masteroforion2 will be translated to C:\Microp~1\Master~1

This note is now slightly emphasized since ~95% of the problems are caused by incorrect mounting. Click now the DOSbox shortcut to test your setup:

MOO2 will be automatically launched inside DOSbox:


Use ALT+ENTER to play fullscreen. BTW there is also a DOSbox Status Window, which will list the incoming connections (see step 8 for details).

7. You will observe that DOSBox is a bit slower than usual Dos under Windows but you can speed it up by editing the dosbox.conf file. Following edits work nicely on my old computer:
frameskip=1
core=dynamic
cycles=auto

But you should test these settings in singleplayer. Some players need a frameskip of 2 or 3. See also the comments: Some players report improved speed by output=ddraw.

8. MULTIPLAYER COMMANDS

The [autoexec] lines for a singleplayer game were explained in step 6. For an MP game you need a further command. And it is important that you add it above the orion2~1 line. I recommend to add the lines as they are mentioned under 8.C but let us first look at the default example separately:

8.A JOINING MULTIPLAYER GAME

[autoexec]
# Lines in this section will be run at startup.

mount c c:\MPS\ORION2
c:
ipxnet connect xxx.xxx.xxx.xxx
orion2~1

You have to add the IP of the host behind the ipxnet connect command (for example: ipxnet connect 83.239.211.21) Use http://whatismyip.com/ to obtain your IP.)

8.B HOSTING MULTIPLAYER GAME

[autoexec]
# Lines in this section will be run at startup.

mount c c:\MPS\ORION2
c:
ipxnet startserver
orion2~1

In this case you don't have to add an IP.

By playing against different players (different IPs!) you will have to change the DOSbox.conf quite a lot. I therefore strongly recommend to add a shortcut of your dosbox.conf file to your desktop:


8.C DOSbox.conf Fine Tuning

You may have noticed that the "#" is used for comments inside the dosbox.conf. It is a convenient way to disable unused lines inside your dosbox.conf. For example, my current dosbox.conf for singleplayer games looks like this:


When I am interested in an MP game I just enable one of the bold lines mentioned under 8.A or 8.B. BTW, I have also added further MOO2 Mods at the bottom which can coexist in the same folder with 1.31/1.40. Note, that there are also the so called switches (/nowh etc.) added. They are explained in the 1.40 FAQ.

The IP in this screenshot is just an example. When you try to connect to this IP you will get this error message inside the DOSbox Status Window:


9. The host needs to forward PORT 213 UDP (default), if he uses a router/firewall.

10. Inside Moo2 you have to click the following buttons:
Multiplayer
Network
Join Game (only the host has to click Start New Game)


11. Run the setsound.exe and choose the soundblaster compatible option there. See this post for details and further fine tuning.

12. Ahhhh.......you need opponents? Join irc.quakenet.org#moo2 (This link works for FF/Opera users. IE users should use the client at the top of the sidebar) and you will find some DOSBox players there. See also this post for further IRC clients.

13. Popular Settings/Abbreviations (click it to enlarge)


Don't forget to enable ship initiative (default in Online Games). It is the last entry in this menu:

90 comments:

StepNRazor said...

How do you set the switches?

siron said...

The switches in the command line of your shortcut (the shortcut you use for kali) are ignored when you use DosBox.

I paste the switches therefore behind the last line of point 7. Instead of:

orion2~1

I have:

orion2~1 /skipintro /minstart /nowh /nobh /planets=3 /nosplint /noorion /noreport

in my current dosbox.conf.

You can also type this directly into DosBox.

Anonymous said...

To enable hardware graphics acceleration change in the [sdl] section of your dosbox.conf:
For Windows use output=ddraw
For Linux output=opengl

This drastically improved the game speed on my machine.

Elb-Kaida said...

Hello,

How do you apply the 1.40 patch on Linux or Mac? It is an Windows Executable! Under DOSbox it does not run...

If you can help me ICQ me at 77077134.

siron said...

The b23 patcher won't run under Linux. But maybe the b24 patcher. See LB's post for details.

StepNRazor said...

I was able to run the patch file in linux using Cedega ( http://www.transgaming.com/index.php?module=ContentExpress&file=index&func=display&ceid=29 ). Cedega is a winbdows game emmulator 'sorta, I think the old Wine win emmulator might work also dunno. For wine google search (Microsoft Windows Compatibility Layer wine) or search for wine in a package search.

Anonymous said...

I always get a page fault when trying to apply the patch with wine

siron said...

Anon,
try to patch it on a Windows PC then. In this case, you have just to transfer the orion2v140.exe to your Linux comp. Or mail me if you need further help. (moo2niacIREALLYDONTLIKESPAM(at)gmail.com)

LB thought about a 1.4patching exe which can be run from DOSBox directly....but it seems he has time trouble right now.

Destian said...

I'm trying to install my MOO2 cd on my G4 Mac, but I can't seem to find the "ORIONCD.INI" file. Not even when I look through the hidden files! Any idea how I can get to it?

Randy said...
This comment has been removed by the author.
siron said...

@ Destian: On Windows OS, the ini file can be generated with any text editor.

@ Randy: I have never heard of this problem in combination with the 1.4 patch and DOSBox. Are you using the 1.4 patch? The comm failure message could be caused when the rkernel.com file is missing in the moo2 folder, but the 1.4 patcher requires that file, so I doubt a 1.4 user would remove it later on. Make sure that both players have the rkernel.com file, which is offered on this page. EDIT: Seems you have solved it already.

Randy said...

@siron
Thanks, yeah, it was just a careless edit of the dosbox config file.

Destian said...

Thanx Siron, I'll try that :-)

I've also played MOO2 on Windows 98 via Virtual PC and it works great!
Though upgrading it with the 1.31 patch will break the game's visuals into pink and yellow dots :-( Haven't found any references to that. Ever heard of it? It's as if there is suddenly something wrong with the videocard.

Randy said...

I've ran into another snag. My roommate and I are attempting to play each other. We're behind the same router and on the same network. When either of us creates the server, it allows the other person to connect, and it shows "Waiting to Join" on one screen and "2 Humans Connected" on the other. However, when the host starts the game, only the host goes through to the race selection screen. Have you guys heard of anything like this happening before? We're both running XP SP2 with Dosbox 0.72 and patched to 1.4.

Randy said...

<-- n00bified... We didn't realize the host had to select their race first. All is solved!

siron said...

Yes, but these graphical glitches can only occur without DOSBox.

Mystic_X said...

Hi Sirion,

I also love MOO2. I'm actually learning to program direct x so i can make my own 'MOO4' game. I think MOO3 was quite poor in many ways, and I want to make something more like MOO2 with my own twists. Anyway, I love that desktop pic you have above. Could you send it to me? Many thanks. My email is point_2_666@yahoo.com.au

Russ

P.S. What race do you prefer if you are not going custom?

siron said...

Hello Mystic X,
I play several races, no real preferences. And my desktop pic is Hubble's sharpest view of the Orion Nebula.

Destian said...

hey Mystic_X,

you should give Galactic Civilisations II a try!
It's just about everything Moo3 should have been :-P

Digimonkey said...

Could someone post up the orioncd.ini text so I can make my own orioncd.ini file? I got the game off Limewire and it seems to have come without the file... :s

Mystic_X said...

Hey all,

Sorry it's been a while since my return (had a few antarans to deal with). I own a copy of Galactic Civilisations II and I think it is great. But I have already thought about what i want exactly. Ever heard of Imperium Galactica 2. The battles in that were good. In fact - it was all pretty good. I would like to try and find that game somewhere.

siron said...

@Digimonkey
It is just this above-mentioned line.

bmenikheim said...

I'm having trouble with the autoexec commands for DosBox. I have edited the dosbox.conf file, but no matter what I change, it always does the same thing. It seems as though there is another file that it is referring to, but there is no other file. I have installed the 1.40b23 patch. When I run DosBox it automatically starts MOO2 and it always does /skipintro /minstart /planets=4 /nosplint /nowh /nobh /noorion /noreport. I want to play a one player game (or hotseat multiplayer) without the /noorion or /nowh options. Any suggestions?

Anonymous said...

I also don't have the OrionCD.ini file. I'm trying to run the game on an osX mac with DOSbox. I understand that I can create the file with a text editor but am totally confused as to what I should type or copy in the file.

Sorry I'm not Windows/DOS hip.

siron said...

When MOO2 was copied to the default folder the text file contains just the above mentioned line:
C:\MPS\ORION2

Not sure if this works under MAC OS. Alternatively, you could mount the CD drive. Check out the DOSBox forum for further assistance by MAC users in this case.

Belt Ways said...

Many mouse issues reported on this game but I can't find a solution. My mouse sticks. Game asked to install Direct 2.0 and I said no. My drivers are not the most recent but not that old. I tried to update to version 1.40 but it didn't help. There must be a simple solution with so many enjoying this game.

siron said...

@belt ways,

when you observe these issues under dosbox see step 7. Additionally, you could alter the sensitivity option in the dosbox.conf.

DirectX is only related to the Windows version of MOO2.

Anonymous said...

Hi,

I really like the DosBox Thing
But when i tested it in Single Player, I had Problems in Saving and Loading Games.

Autosave always worked (lost a few rounds now and then) but manually saving caused a DosBox Error, the whole thing hanged up.

And loading games caused the same chrash. Except when loading from Start Menue.

What is wrong???

Wizardling said...

Hi - I get no sound with DOSBox 0.7.2 under OSX 10.5.5 when trying to run MOO2 :-( Any idea what I'm doing wrong?

Anonymous said...

I can't get it to find the ORIONCD.INI file either, and I've created the file in the C:\MPS\ORION2 directory, exactly as instructed.

I'm running Windows XP SP3, so it's not the same problem that the Mac users were having.

Anonymous said...

Also, when I DO get it running, is there a way to set up 1.4 specifically for games between 3 specific machines on a LAN? My friends wish to play against each other, not against people online.

siron said...

@anon1: Have you solved the Save-Load issue? NEver heard of it before. You should give further infos: OS, dosbox.conf etc.

@Wizardling: What steps did you have tried so far?

@anon2: Could be the case that file extensions for txt files are not displayed currently. So you actually have ORIONCD.INI.txt which prolly wont work.

@anon3: Just use the local IPs of the different machines (not the external IP of the router).

Philcha said...

Widescreen monitors are becoming dominant, and MOO 2 in a full-screen DosBox is horribly distorted on a wide monitor. I run DosBox as a window. For me that works OK visually but has 1 disadvantage - if Win XP times out and reverts to the log-in screen (e.g. if the doorbell rings and it takes more than a couple of minutes for me to deal with the situation), DosBox crashes.

siron said...

These crashes are related to
output=overlay

There are no crashes by using
output=ddraw

Additionally, ddraw enables the windowresolution option. You should try windowresolution=1024x768 on widescreen monitors.

Anonymous said...

hi there im trying to play against a friend and i followed all of the steps excactly and when either computer hosts the other computer cannot see any games on the "Join Network Game Setup" screen...

any help?

siron said...

Do you wanna play in a LAN?
Just use the local IPs of the different machines (not the external IP of the router) then.

Anonymous said...

during the dos bootup the computer says tunneling client failed to connect at xxx.xxx.xxx.xxx

siron said...

I assume xxx.xxx.xxx.xxx stands for the correct IP of the Host. Make sure that the host followed step 9 then.

Fernando said...

Anyone else having issues trying to get the music and animations (diplomacy, opening, etc) to play properly? Tried with DOSBOX 0.72 on 3 different machines so far (Windows XP home, Windows XP Pro, Ubuntu 8.04).

Game plays well other than that.

Sambo said...

When attempting load, it gets to the intro than kicks me out and says:

, Networking [Entry 1] could not be found.

Any ideas?

siron said...

Are you sure that you have used the above mentioned patches?

What CD Version do you have?

Anonymous said...

hi guys, there is a new version of doxbox which doesnt contain that file that should be rewritten. Can somebody post here link for 0.72 doxbox pls from alternative site.. thx

siron said...

Q: But why does my DOSBox config file refuse to pop up in the DOSBox directory? It's always being outputted to a hidden directory in my "Documents and Settings". How do I fix this?

A: that is intentional in order to make dosbox work nicely on Vista and with more then one user on your system.
Just use the shortcut to edit it and it should be fine

Anonymous said...

I get a problem when firing up Dosbox:
"Cannot locate all game files. Please insert CD"

Any ideas?

Justin said...

Alright i'm using DBGL to run MOO2 with a roommate, I have followed the hosting steps and he the joining steps but whenever he launches it shows the "server timeout" error in the dosbox right before opening moo2. Not sure what is going wrong.

In my ipx command box I have:" startserver 1024 " I have the 1024 in because without it, it says that it failed to initialize the server.

He has: " connect xxx.xxx.xxx.xxx " my correct local ip address.

we are both running version 1.31. And i have my router forwarding port 213 to my computer.

Any ideas? reply here and email me if you feel generous: jtrainusu@gmail.com

thanks

Justin said...

I was able to resolve my previous problem. For some reason my computer (mac) needs a port higher than 1024 to host.

my command line would be: ipxnet startserver 1024
also my port 213 would be forwarded to my computer.

any computer connecting would be: ipxnet connect xxx.xxx.xxx.xxx 1024

hope this helps others who may have this problem in the future.

Justin

Jorus said...

Hi, it's 11/10/09 and I just wanted to say thanks. Through DosBox I have my all time favorite (MOO2) running better than ever on my new 64 bit Vista system.
I had to follow the instructions and hints here and on the readme file (e.g. core=dynamic, cycles=max, etc). Also the dosbox.conf file was hidden, you have to search for hidden files.
Thanks again, and now maybe I can try multi-player....

Simon said...

When I launch the install.exe, the setup starts but only says "checking drives" and never starts the actual installing process. Anyone knows what I should do?

Anonymous said...

Has anyone come across the problem of not being able to refit or even design ships? For some reason after doing all of this and a reinstall, that's what happened. Along with battle pods and a few other things missing.

Simon said...

Do you have Tactical Combat enabled? Otherwise you can't design ships.

Anonymous said...

no one seems to be answer the question of what went wrong when u get this error "Cannot locate all game files. Please insert CD". i really want to play moo2, just SP tho. and i could use some help figuring this out.

siron said...

Check step 1B. Missing orioncd.ini will cause that error.

Anonymous said...

i believe i have that covered the file that i changed was called, Orioncd and it was a notepad app. i didnt see a .ini but i assumed that was it. am i wrong?

siron said...

Check your folder options.

Folder options - view

Make sure that

"Hide extensions for known file types."

is disabled.

Anonymous said...

yes i assumed correctly that was the file. its just supposed to be C:\MPS\ORION2 correct?

siron said...

Yes.
And you have copied all files from CD into that folder?

For most versions even an empty orioncd.ini works. IIRC for some versions you need it in caps but other versions have trouble with caps.

Anonymous said...

i believe i did, is their a way i could show you?

Anonymous said...

gibs hier auch jemand der deutsch kann? brauche hilfe! meine erste frage wenn ich den patch 1.40 instaliere ist das spiel dann immer noch auf deutsch? ich hab die vollversion von der gamestar 1/99 da ist win95.exe und die Orion2 datei enthalten wie geh ich am besten vor?
bitte um schnelle antwort den ich würde gern mein geliebtes MoO2 online spielen :)

Anonymous said...

You should note that in DOSBOX 7.3, the dosbox.conf file doesn't appear normally.

You have to go into Dosbox then, at the the command prompt in Dosbox type "config -writeconf dosbox.conf" and then press the "Enter" key. Then type 'Exit' to leave. The file will then be there.

Since most folk are using 7.3 and onward, you might wanna add this as a step.

Otherwise, excellent guide.

siron said...

Seems to depend on OS.

Just installed on Win7 and the file is in

C:\Users\%USER%\AppData\Local\DOSBox

now.

And it is called

dosbox-0.73.conf

now.

There is additionally an entry in the start menu "edit configuration"
to edit this file.

Anonymous said...

If this helps I too was getting the error "Cannot locate all game files. Please insert CD" but have found a way of making it work. I installed to the c:\mps\orion2 directory then copied all files from the cd to the c:\mps\orion2 directory. Then ran the patches and now no more error.

Rego said...

Does it run smoothly with Windows 7? Do I need Windows 7 Professional for the XP Mode? What about the 64bit version? I would appreciate if anyone could share his/her experience.

Awesome website for a legendary game btw.

Jorus said...

I followed the directions here and successfully installed MOO2 running in DosBox on my Windows 7 Home Premium 64bit computer.

Anonymous said...

Hi,
at first, I wanted to thank for the great guide, but there are two things I wonder about...
a) I don't have an setsound.exe in my MOO2 folder, is it possible for me to somehow get sound to work in dosbox? It was a win version of Moo2, but the Orion2.exe was on the disc as well.
b) Is there a way to change the language from English back to German after applying the two patches? Even though I'm completely capable of understanding English, a good chunk of nostalgia is lost if all the technologies and stuff aren't German anymore. Plus, I technicly would have to re-memorize what they all are called (even though most of them have similiar names in both languages).

Anonymous said...

Hi Guys the date is 05/01/2010 i was wondering if you all still play MOO2, and if anyone has MOO2 Running on vista, i have the english version of patch 1.31 and 1.4, still won't apply, the rKernal file link is broken, i cant dl that... if there is anyone willin to assist me could u please leave me your email adress so i can get in touch with you to help me figure out how to get online?

Anonymous said...

In my case the rKernel file was missing too.

Found it still in the original MoO2 directory apperantly the installer forgot to copy it to the game directory.

So thats what I did, explored the MoO2 CD, found the rKernel, copied it and just pasted next to the patch in game files.

Heather Wilson said...

I tried to install moo2 on my win 7 comp. using dosbox, it says to type orion2 to play game after install but it doesn't work and the 2nd box says install failed. what am i doing wrong?

siron said...

Have you tried step 1b ?

Anonymous said...

remember to install it to a folder without spaces in the name. For me this is in the C:\MPS folder

Anonymous said...

Hello, its unbelievable how many people are trying to make MoO2 work at this date.. Anyway Im only having a small problem with the mouse speed in dosbox (7.2). Its slow and without acceleration, I have a normal microsoft mouse working ok in windows and most Dos games. I tried altering the conf file but it only made it worse. ANY ADVICE FOR SMOOTH MOUSE MOVE?

Anonymous said...

Heya, this has been a fantastic help getting the game to work on DOSBOX on my laptop. Thanks.

However, I find that the game is too small on the screen. In full screen mode, there is a big black border (windoboxed) around the game, which I can't move my mouse into. The game probably only takes up about a third of the area of the screen.

It's just about playable, but I have to go very close to the screen to see it. I don't have this problem with any of the other DOSBOX games I run.

My screen ratio is 1:0.6 (12 x 7 inches-- I can't figure out if this is widescreen or not). The resolution is 1280 x 800. I am using Windows 7, and it is patched to version 1.4. Cheers!

Anonymous said...

p.s. I have the same small game screen problem when using the Windows 95 version.

Qelix said...

As infogram's ftp server seems to be down, heres an alternative to download moo2v131.zip:
ftp://ftp.atari.com/patches/moo2/moo2v131.zip

Aaron Stump said...

I'm getting a 404 on the rkernel.zip file.

Is there an alternative download for it?

I have the original CD, but there is no DOS exe for Orion on it.

frustrated said...

Please help. I am looking for a way to play my original mac mooII disc on my new macbookpro (the message says no longer supported) or my older ibook g4. This is the only game I ever seriously played and I would very much like to re visit it. Is there a version of classic 9 I can down load from somewhere - anywhere that will work on either machine? Thank you from frustrated of Streatham.

Wizardling said...

The easiest way to run MOOII on a new Intel Mac is to forget about your classic Mac version, download DOSbox or better yet a nicer easier to use MacOSX frontend like Boxer http://boxer.washboardabs.net/ , grab the DOS version of MOOII (I'm sure a resourceful person can locate a copy online...) and play that way.

Anonymous said...

Siron, how did you get DosBox to show up more than 262 MB free harddisk space?

siron said...

Simply chose 1B then. No install needed.

Stefan said...

Dear Siron,

first Id' like to thank you for this great way to play moo2 online against my best friends (they are far away from my current habitation)

Everything works great. But one phenomenon has now occured: Our last multiplayer savegame contains only 2 human players, but the third player is missing in this savegame. 2 players can play but we were 3. Any ideas whats happened?

Stefan

Stefan

siron said...

If Player A, B, and C started a game but C is missing in the save means that player A or B saved this game while Player C had already left the game via the quit menu.

Therefore Player C should still have the correct auto save in slot 10.

If the autosave of C is overwritten there is still a chance to fix this via hex editing. See the forum for the email address. I would take a look in this case.

LTPLEGEND said...

I bought this game from impulse so it builds the dosbox config for you. I copied it and have been able to play multiplayer games my question is though, it seems like my dosbox does not use the config file. It always opens to z: and no changes I made in the CFG reflect in the dosbox. Any Ideas? It's like I have to associate it with the game or cfg file somehow and I don't know what to do. Like I said though I can play network games. I just have to enter the code each time for each pc.

Anonymous said...

Is there a new link for the rkernel.zip? I can't update to 1.4 without it, but the link on your post is dead.

Roun said...

Is this still a valid system? I have been wanting to play this game with other people sense I was a child, I love this game and would enjoy playing against people who have at least half a monkey brain.

Ps, I took a look at the steps and this looks confusing as hell, is there a way to simplify this at all?

geosch said...

It is complicated, but the directions will get you there.
An alternative would be to buy it online (for example Gamestop/impulse for $5.99) which comes with an instaler.
Fantastic game.

Roun said...

Well, no, I know how to get the game started with dosbox, I have actually used this program before, I just dont know about the whole internet connection thing, it makes me a bit dizzy...

Anonymous said...

Jesus why won't someone simply prepackage a standalone windows 7 version that works without having to bother with all the cryptic setup non-sense.

Anonymous said...

When I try to run setsound.exe, I get this error: The version of this file is not compatible with the version of windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
Any ideas on how to fix this?

Anonymous said...

I didn't see my problem mentioned, so I thought I'd post. Managed to get my copy to run after a little problem with the path to CD. Now however all the game does is display the Simtex and then Microprose splash screens ... and then nothing. Doesn't crash or anything, just stays on a black screen and doesn't respond to any input. Any ideas? Running on Dosbox Turbo on a Nexus 7.

Anonymous said...

In reply to my own comment, I seem to have it running now. I found on another site someone mention I needed to increase the available memory from 8MB default to 16MB for the game to run correctly in DOSBOX TURBO on Android.

Максим Мартиненко said...

Well, if you people still read these...

I have a problem, ipxnet connects in dosbox, but my friend still can't see my hosted moo2 games

Loading...